RU42UUCCOP4/XRU2012 Cross Roller Bearing Implement ISO9001 standards

• Customization: Available
• Contact Angle: 45°
• Aligning: Aligning Bearing
• Model NO.: RU42(G)/RU42(X)
• Separated: Separated
• Rows Number: Single
• Load Direction: Radial Bearing
• Material: Bearing Steel
• Speed: 300rpm
• IN stock: large inventory
• Warranty: 2 years
• transportation: air transport
• Standard: ISO9001
• Transport Package: Wooden Box
• Specification: 70*20*12mm
• Trademark: DZE
• Origin: Luoyang
• HS Code: 8482109000

Product Description

   
RU42/XRU2012 Cross Roller Bearings-Completely replace THK bearings

 

Drawing-RU42 XRU2012
RU42UUCCOP4 is a precision cross roller bearings with cylindrical rollers as rolling elements. There are three types of mounting structures:

&:RU42; both inner and outer rings are smooth holes, and the countersunk holes are in the same direction;

&:XRU2012; both inner and outer rings are smooth holes, and the countersunk holes are in opposite directions;

&:CRBF2012, the outer ring is smooth and the inner ring is threaded;

What kind of bearing is model RU42 Cross Roller Bearing?
1. High precision: the precision can reach P4 and P2 level;
2. High rigidity: all bearings of this series are pre-loaded;
3. High load capacity: it can bear axial load, radial load and overturning load.
4. Small size: The bearing is small in size, which can save space for the host.
How to install this series of bearings?
The selection of crossed roller bearing is mainly to consider the mounting mode and size of the bearing, which can be divided into the following two types:
1. The Roller Bearing without installation hole has a thinner wall thickness, which is suitable for small installation space. High Precision Bearing needs to be pressed on the equipment with flange plate. The specific difference of RB/RE/CRBH/SX/RA type is as follows
2. The inner and outer rings of the crossed roller bearing with mounting holes are designed with mounting holes for convenient installation and use. They are widely used in robots and turntables.

Application
Plastic molding machine
Ceramic cutting machine
Plastic braiding machine
Pharmaceutical packaging machinery
Painting production line 
Automatic grinder 
Single column hydraulic press
Planer Dump truck Lift
Crawler excavator 
Tower crane 
Rebar Cutting Machine
Bulldozer
Tire excavator Bridge crane 
Tower crane 
Marking car 
Hoist
Road machinery
Backhoe Loader 
Gantry crane
 Material testing machine 
driller

RU series Bearings models-RU42 Cross Roller Bearing;XRU2012 Bearing

	(mm)			(mm)				(KN)
	d	D	B	PCD1		PCD2		C	Co	kg	THK	IKO
XRU1008	10	52	8	42	6-Ф3.4,Ф6.53.3	16	4-M3	2.91	2.43	0.12		CRBF108AT
XRU2012	20	70	12	57		28	6-M3	7.35	8.35	0.29	RU42	CRBF2012AT
XRU2512	25	80	12	67		35	6-M3	8.61	10.6	0.4		CRBF2512AT
XRU3515	35	95	15	83	8-Ф4.5,Ф84.4	45	8-M4	17.5	22.3	29.5	RU66	CRBF3515AT
XRU5515	55	120	15	105	8-Ф5.5,Ф9.55.4	65	8-M5	20.3	29.5	1	RU85	CRBF5515AT
XRU8022	80	165	22	148	10-Ф5.5,Ф9.55.4	97	10-Ф5.5,Ф9.55.4	33.1	50.9	2.6	RU124	CRBF8022A
XRU8022G											RU124G	CRBF8022AD
XRU8022X							10-M5				RU124X	CRBF8022AT
XRU9025	90	210	25	187	12-Ф9,Ф148.6	112	12-Ф9,Ф148.6	49.1	76.8	4.9	RU148
XRU9025G											RU148G
XRU9025X							10-M5				RU148X
XRU11528	115	240	28	217		139	12-Ф9,Ф148.6	80.3	135	6.8	RU178
XRU11528G											RU178G
XRU11528X							12-M8				RU178X
XRU16035	160	295	35	270	12-Ф11,Ф17.510.8	184	12-Ф11,Ф17.510.8	104	173	11.4	RU228
XRU16035G											RU228G
XRU16035X							12-M10				RU228X
XRU21040	210	380	40	350	16-Ф14,Ф2013	240	16-Ф14,Ф2013	156	281	21.3	RU297
XRU21040G											RU297G
XRU21040X							16-M12				RU297X
XRU35045	350	540	45	505	24-Ф14,Ф2013	385	24-Ф14,Ф2013	222	473	35.4	RU445
XRU35045G											RU445G
XRU35045X							24-M12				RU445X

 We  also do crossed roller bearing:
RE2008   RE2508   RE3010   RE3510   RE4010   RE4510   RE5013   RE6013   RE7013    RE8016   RE9016   RE10016    RE10020   RE11012   RE11015   RE11020   RE12016 RE12025 RE13015   RE13025 RE14016 RE14025   RE15013 RE15025   RE15030   RE16025 RE17020 RE18025 RE19025 RE20025 RE20030 RE20035   RE22025    RE24025   RE25025   RE25030 RE25040 RE30025   RE30035 RE30040 RE35020 RE35025   RE40035   RE40040   RE45025   RE50025 RE50040 RE50050 RE60040 RE70045   RE80070   RE90070   RE1000110   RE1250110
RU42 RU66 RU85 RU124 RU148 RU178 RU124X RU148X RU178X RU124G RU148G RU178G RU228 RU297 RU445 RU228X RU297X RU445X RU228G RU297G RU445G
CRBH20025 XSU140414 RKS.062.20.0414 08-0307-00 



                                                              RU42 Assembly drawing

                                                                                 XRU2012 Assembly drawing 

                                                       RU85X Assembly drawing

 RU42 precision bearing parameters

Bearing type

RU85UUCC0P4 XRU5515

Inner diameter (mm)-

20

outer diameter(mm)-

70

thickness(mm)-

12

weight(Kg)-

0.85

The material-

GCR15/GCR15SiMn

Precision grade-

P5/P4/P2

Lubrication type-

grease

Rotating way-

The inner and outer circles rotate

Loading direction-

Axial and radial multidirectional loading

Bearing structure-

The inner and outer circles are one

type

Main dimensions

Installation dimensions

Basic rated load (radial) ()

weight

Inner diameter d(mm)

outer diameter D(mm)

Roller garden diameter dp (mm)

thickness B(mm)

The oil hole φ

chamfering r(min)

ds

Dh

C kN

Co kN

Kg

RU42UUCC0P4

20

70

42

12

1.5

1.5

37

47

7.8

8.6

0.85

,RU

Product features

90V,,.,,,P2.,,,,,IC.Crossed roller bearings are two columns of cylindrical rollers arranged vertically across each other through nylon isolation blocks on the 90-degree v-shaped raceway, so Roller Bearing can withstand radial load, axial load and torque load. The dimensions of the inner and outer rings are miniaturized, the extremely thin form is close to the limit of the small size, and has high rigidity, the cross roller bearing precision can reach P2 level. It is suitable for joint rotating part of industrial robot, rotating table of machining center, precise rotating table, medical machine, calculator, IC manufacturing device and so on.

Product description of the same series as model RU178

RU(),.,,,..RU type (inner and outer ring type) this series of models have been processed with mounting holes, so there is no need to fix flanges and supports. In addition, because of the integrated inner and outer ring structure with the seat, the installation has little effect on the performance, so stable rotation precision and torque can be obtained. Can be used for outer ring and inner ring rotation.

More models

RU66(CRBF3515),RU85(CRBF5515),RU124G(CRBF8022),RU148G,RU178G,RU228,RU297,RU445,RU228X,RU297X,RU445X,RU228G,RU297G,RU445G

Applicable occasions

-----Nc machine tool - nc rotary table - industrial robot arm - precision speed reducer - detection equipment - precision medical equipment

More bearing models are welcome to contact us.

 ABOUT DZE

DZE Bearing was established in 2012 is a precision bearing manufacturer,  factory located in Luoyang, China, the thousand-year-old imperial capital. Luoyang is the capital of bearings and the city of peonies, where one hundred and three emperors made their capital.  Has 10 major bearing manufacturers. Our manufacturing process:

Our Advantage-RU series Bearings

&:Serve The Word-Professional logistics to reach any place
&:IN-Stock-DZE has most of its inventory in stock and can ship to you on the same day,

&:24-Hour Service-365-day online service throughout the year

&:Customization-Customize non-standard bearings according to requirements
Production process-XRU2012 bearing
1.Drawings    
According to the customers specific requirements, the field where the bearing is used and working conditions. We optimize the design of products in order that the customers could economize and get their desired pruducts
2.materials
All the materials are high-quality bearing steel with high purity. The quality is strictly inspected and checked. The high quality of the product is guaranteed from the first procedure.
3.Forging
The professional forging equipment and advanced set-forging process are used. 
Steel bar is heated with the medium frequency induction and its different positions temperature is measured with the thermometer. After heating and thermal hydraulic shear, they are forged in accordance with the needs of grind and expansion. Then they are groud and expanded with CNC grinding machine so that the products could meet the technological requirements in size and geometry
4.Heat treatment annealing
All products are produced with the spheroidal annealing to ensure the product temperature uniformity good internal structure and other characteristics which is beneficial to the next step turning and quenching.
Heat treatment with quenching and tempering
The heat treatment in strict accordance with advanced process and the precious control quenching ensure that the bright quenching effect be reached
5.Rough grinding
Although it is a rough grinding process,  we still strictly control the size accuracy and geometric accuracy to lay a solid foundation for the precise grinding quality
Stable tempering
We have stable tempering on the ring after the rough grinding to eliminate stress and further stabilize the size and geometric precision
Thus guarantee high-quality products
6.Precision grinding
The use of advanced CNC automatic production ensure that the geometric accuracy of the product reach P4 or P2
Flaw detection
Every single crack of the spare parts must be detected thoroughly to guarantee Zero Defect
Demagnetization
The residual magnetism of bearing parts is eliminated to relieve the harm to the bearings and get high-quality product
7.Assembling
We use automatic assembling line with online inspection of vibration noise and clearance etc and classify the quality level strictly. All these measures guarantee delivery of qualified products to customers 
8.Spare parts
We choose steel ball ,cage ,dust cover , sealing ring , grease  ,and other parts in line with international standards to ensure our product quality
9.Cleaning ,  locating cleaning
drying ,  oiling , greasing  packaging  storage  and delivery

Customization-RU series Bearings
DZE provides customized services for any bearing size, including slewing bearings, Cross Roller Bearings ,toothless structures, external gear structures, internal gear structures. Single row ball, single row roller, double row ball, double row roller, precision gears, spur gears, helical gears, herringbone gears, arc gears, worm gears.

Customization of special materials: 13 years of manufacturing experience is a great asset. DZE special materials include: stainless steel :9Cr18, 9Cr18Mo; S165M; TC4 titanium alloy, hard aluminum; nylon. Nickel alloy, aluminum bronze.

FAQ
1.Q: Are you a factory or a trading company?
A: DZE Precision is a physical factory with 13 years of manufacturing experience.



2.Q: Can I get some samples? Do you provide samples for free?
A: Yes, of course, we are honored to provide you with samples.

3.Q: What is the payment method?
A: 100% T/T in advance, B: 100% L/C at sight

4.Q: What is the minimum order quantity of bearings?
A: The minimum order quantity is 1 set.

5.Q: What kind of services can you provide?
A: Provide free design, free drawing confirmation, including verification of bearing axial radial and overturning moment. Installation guidance; OEM, etc.

6.Q: How long is your delivery time?
A:RU42 XRU2012 is in stock, generally 1-2 days. If the goods are not in stock, it is 35 days, also according to the quantity.

7.Q: Can you provide special customization according to working conditions?
A: Of course, we can design and produce slewing bearings suitable for different working conditions.

.Q: How about your guarantee?
A: We provide lifetime after-sales technical service.