VU360680 Slewing Bearing Wire Dryer Peristaltic Pump and Cooling Pipe

• Customization: Available
• Contact Angle: 60°
• Aligning: Aligning Bearing
• Model NO.: VU360680
• Separated: Separated
• Rows Number: Single
• Load Direction: Radial Bearing
• Material: Bearing Steel
• Craft: Grinding
• Transport Package: in Wooden Box
• Specification: 565*795
• Trademark: LYDZC
• Origin: Luoyang China
• HS Code: 8482109000
• Production Capacity: 3000sets/Year

Product Description

The cross section of DZE rotary support wheel bearing is rectangular on the drawing, and the size range of outer diameter is 280mm--1200mm. This series of products has the highest cost performance. The inner structure of the bearing is a convex raceway and a ball ball of maximum size. This structure enables the series of bearings to be subjected to higher torque, thrust and radial loads than normal four-point contact ball bearings, with larger and more perfect sealing and non-contact dust cover in their grooves. It has a certain effect on blocking pollutants. The sealing method adopted is rubber strip seal, which has good flexibility and low cost. The VU360680 bearings are toothless bearings. The precision of all models can reach P5 level. The rotary table bearing is a kind of large bearing which can bear the combined load of large axial load, radial load and overturning moment at the same time.



The specific size:

di	565  mm
Da	795  mm

Da ZT	793  mm
Di	678  mm
da	682  mm
dB	22  mm
di ZT	567  mm
H	79  mm
h	72  mm
La	755  mm
Li	605  mm
na	30
ni	30
T	11  mm
t	11  mm

m	120  kg
Fr per	363000  N
Ca	640000  N
C0a	2260000  N
Cr	415000  N
C0r	1020000  N
	0,09 - 0,36
	0,15 - 0,59

Instructions:
(1) notes for installation before use: bearing cleaning, operators can bring disposable plastic gloves, bearing cleaning fluid should be clean and high-purity gasoline, preferably gasoline of at least 90 or even white gasoline of 120. It can be installed after washing. The bearing should be air-dried or naturally dried after cleaning. It is recommended to apply a thin layer of lubricant to the mounting surface of the bearing before installing it. Check the main plane before installation to remove clutter and burrs.
(2) bearing used in the maintenance and maintenance: bearing face with quenching soft belt S quenching soft belt is located in the loading area (always filling in soft) bearing in the continuous running 100 hours after comprehensive check installation bolt pre-tightening torque, check after every run 500 hours, normal operation between 50-100 hours after adding a grease, when the machine stopped running for a long time must add sufficient amount of grease.
 

Installation method: Distinguish between outer ring mounting and inner ring mounting, as well as the type of mounting holes (threaded holes or through holes).
Preload: Appropriate preload can enhance stiffness and precision, but excessive preload increases friction and temperature rise, affecting lifespan. Some bearings come factory-set with preload, while others require adjustment during installation.
Lubrication: Select the appropriate grease type and lubrication interval.
Speed: While primarily used in medium-to-low speed high-precision applications, its speed limit must also be considered.
Sealing: Choose suitable sealing types and materials based on the working environment (cleanliness, humidity, temperature).

More models:

			(mm)				Mounting hole size:						Gear parameters:				Basic load Ratings	Weight
Designation			Dimensions				Mounting Hole Size						Gear Data				Coa(kN)	kg
			Da	D	d	H	D1	D2	n1	n2	φ1	φ2	m	z	do	x
VLA200414N ZT			503.3	480	304	56	455	332	10	12	M12	φ18	5	99	495	0	600	31.2
VLA200414N			503.3	480	304	56	455	332	10	12	M12	18	5	99	495	0	295	29.5
	231.20.0400.013		504		304	56	455	332	10	12	M12	18	5	99	495	0	250	29.3
	231.20.0400.503		504		304	56	455	332	10	24	M12	18	5	99	495	0	250	29
		E.505.20.00.C	504		304	56	455	332	10	12	M12	φ18	5	99	495	0	500	33.3
	231.21.0475.013		504		305	56	455	332	10	12	M12	18	5	99	495	0	250	29.3
VLA200544N ZT			640.3		434	56	585	462	14	14	M12	φ18	6	105	630	0	670	41.5
VLA200544N ZT			640.3		434	56	585	462	14	14	M12	φ18	6	105	630	0	790	41.6
VLA200544N			640.3		434	56	585	462	14	14	M12	18	6	105	630	0	385	41.5
	231.20.0500.013		640.8		434	56	585	462	14	14	M12	18	6	105	630	0	330	39.5
	231.20.0500.503		640.8		434	56	585	462	14	28	M12	18	6	105	630	0	330	39.2

Main spindle bearings:
Support the tool or workpiece spindle, requiring extremely high rotational accuracy, rigidity, and high-speed performance. (Typical bearings: Paired precision angular contact ball bearings, precision cylindrical roller bearings)
Lead screw support bearings: Support the ball screw and withstand axial loads. (Typical bearings: Paired angular contact ball bearings, thrust roller bearings)