First, during installation, make sure that the bearing is parallel to the rotating platform of the equipment, and at the same time, make sure that the mounting hole corresponds to the thread of the main engine.
Second, when the bearing is officially installed at the beginning, the good way is, of course, to be as close as possible to the supporting bearing.
Third, after the device supports the bearing, the bearing is already close to the nut, so the operator should reasonably control whether the device part of the nut is appropriate at this time; In addition, it should be noted that when the host machine arrives at the machine tool, the nut should not be easily unloaded from the screw rod, otherwise the result will still be quite serious.
As a mechanical product, there will inevitably be some problems, such as mechanical wear, mechanical failure, etc. When the mechanical product fails, if the problem is not solved in time, there may be big troubles. Undoubtedly, the use of mechanical products can greatly improve the work efficiency. Once the mechanical equipment fails, it will affect the production progress, and if it is serious, it will also affect the delivery time, which will lead to default; Therefore, in general, it is good if the problems of mechanical products can be solved in time.
How to solve the abnormal use of bearings during use:
1. Under normal circumstances, the bearing will generate heat more or less during use. For example, when rotating at high speed, heat energy will be generated during friction, which will cause the bearing to generate heat. This heat condition belongs to the normal category, so there is no need to worry too much; If possible, stop the bearing for a few minutes and restart it.
2. In addition to normal heating, the bearing may have abnormal heating. For example, when the water drops on the bearing, they will vaporize immediately, which is accompanied by the problem of jitter; In this case, it is necessary to attract everyone's attention. If it is not solved in time, the bearing may be damaged due to heating. Wear the bearing end face and raceway. Thereby affecting the service life of the whole bearing product.
Audited Supplier 
){kind=link}