Product Description
Rks.161.14.0414 is a series of cross roller bearings with external teeth. The outer ring is provided with oil injection hole, bilateral contact sealing ring, and the inner and outer rings are provided with screw holes for mounting.
Roll type: cylindrical roller
Seal type: bilateral contact seal
My company I once this kind of bearing model, welcome to inquire!
RKS. 161.16.1424 RKS. 161.16.1534 RKS. 161.16.1644 RKS. 161.16.1754
RKS. 161.20.1904 RKS. 162.14.0414 RKS. 162.14.0544 RKS. 162.14.0644
RKS. 162.14.0744 RKS. 162.14.0744 RKS. 162.14.0944 RKS. 162.14.1094
RKS. 162.16.1204 RKS. 162.16.1314 RKS. 162.16.1424 RKS. 162.16.1534
RKS. 162.16.1644 RKS. 162.16.1754 RKS. 162.20.1904 RKS. 160.14.0414
RKS. 160.14.0544 RKS. 160.14.0644 RKS. 160.14.0744 RKS. 160.14.0844
1. Common types of rotary supports:
Light series slewing supports (L series) L series light slewing supports are mainly used for trailers and farm vehicles, which are connected by a supporting frame and chassis and serve as rotations.
The L series lightweight slewing bearings manufactured by luoyang dongshaft bearings cover all fields of trailer technology and can solve problems in all applications.
L series slewing supports can be machined into mounting holes and without mounting holes, and L series slewing supports with special gears can be provided as required.
Installation and maintenance:
The outer ring is bolted to the frame and the inner ring is bolted to the chassis.
Frames, swivel supports and chassis are not allowed to be welded together.
The inner and outer rings must be mounted on a very flat surface and at least 50% of the area around them is supported
L series lightweight slewing supports should be connected to the vehicle lubrication system as much as possible. For better lubrication.
L series lightweight slewing bearings are produced with a very thin layer of lubrication that must be fully lubricated on first use.
L series lightweight slewing bearings with simple sealing construction have been filled with oil grease at the factory and generally do not need to be lubricated again after installation. However, after using for 2 years or 200,000 km, the same lubrication measures must be adopted as the standard type. The specific measures shall be determined according to the external environment used.
Audited Supplier 
){kind=link}