Product features:
series rotary table bearings are rectangular in cross section, with an outer diameter range of 16 to 37 inches, 400 to 950mm. The series bearings provide precise positioning and high repeatability, suitable for continuous rotation, intermittent rotation and swing motion.
Design features: this series of internal use deep groove raceway, is four point contact ball bearing, can withstand pure radial force, thrust and moment load and mixed
In the load. The preloading at the bore diameter enables the bearing to have higher stiffness, and the precision controlled radial and axial runout tolerance ensures the high accuracy of the bearing. Axial runout is 0.001TIR, radial runout is 0.002TIR.
The series USES dividers to keep the balls apart, minimizing friction and noise. Perfect internal pit seal helps to flush out contaminated impurities.
The KH series bearings have inner tooth type, outer tooth type and non-tooth type. Adopt involute full high tooth profile with pressure Angle of 20 degrees, in line with AGMA Q8 level accuracy standard, allowable side clearance is smaller, positioning accuracy is higher, and noise is lower during operation.
Domestic size:
| model |
sides(mm) |
weight |
Mounting hole size(mm) |
| Do |
di |
H |
kg |
Lo |
no |
Li |
ni |
| HS6-16P1Z |
518.16 |
304.8 |
56 |
47 |
482.6 |
8 |
342.9 |
12 |
| HS6-21P1Z |
647.7 |
431.8 |
56 |
62 |
609.6 |
12 |
469.9 |
15 |
| HS6-25P1Z |
749.3 |
533.4 |
56 |
73 |
711.2 |
15 |
571.5 |
18 |
| HS6-29P1Z |
848.36 |
635 |
56 |
84 |
812.8 |
15 |
673.1 |
18 |
| HS6-33P1Z |
949.96 |
732.28 |
56 |
98 |
908.05 |
18 |
774.7 |
20 |
| HS6-37P1Z |
1047.75 |
833.88 |
56 |
106 |
1009.65 |
18 |
873.25 |
20 |
| HS6-43P1Z |
1198.37 |
984.25 |
56 |
122 |
1158.75 |
20 |
1022.35 |
24 |
Audited Supplier 
){kind=link}